Teledyne FLIR BFS-PGE-27S5C-C

Part Number

BFS-PGE-27S5C-C

Resolution

1936 x 1464

Megapixels

2.8

Max Frame Rate Standard

43

Sensor Model

Sony IMX429

Pixel Size

4.5

Sensor Type

CMOS

Sensor Format

2/3"

Shutter type

Global shutter

Spectrum

Color

Optical Filter

IR-Cut Off (670 nm)

Lens Mount

C-mount

Synchronization

Software trigger, hardware trigger, action command, PTP

Data Interface

Gigabit Ethernet 1 Gbps

Features

Acquisition Modes

Continuous / Single Frame / Multi Frame

Exposure Control

Hardware trigger, programmable via camera API, automatic

Exposure Range

15 µs to 30 seconds

Flash Memory

6 MB non-volatile memory

Gain Control

Manual, automatic (AGC)

Image Buffer

240 MB

Image Processing

Color correction matrix, gamma, lookup table, saturation, and sharpness

Partial Image Modes

Pixel binning, decimation, ROI

User Sets

2 user configuration sets for custom camera settings

White Balance

Manual, automatic (AWB)

Performance

Absolute Sensitivity Threshold (y)

3.13 (HCG) / 6.29 (LCG)

Dynamic Range dB

70.63 (HCG) / 71.81 (LCG)

Gain Range

0 db to 47 dB

QE Blue

51 (HCG) / 52 (LCG) @460 nm

QE Green

60 (HCG) / 61 (LCG) @530 nm

QE Red

47 (HCG) / 47 (LCG) @625 nm

Saturation Capacity (e-)

10652 (HCG) / 24495 (LCG)

Temporal Dark Noise (Read Noise)

2.63 (HCG) / 5.79 (LCG)

Physical

Auxiliary Output

3.3 V, 120 mA maximum

Connector

RJ45 (horizontal locking) | Hirose HR10A-7R-6PB

Digitization Bit Depth (ADC)

12-bit

Dimensions [W x H x L]

29 mm × 29 mm × 39 mm

Mass

53 g

Non-Isolated I/O Ports

1 bi-directional, 1 input

Operating Humidity

20 to 80% (no condensation)

Operating Temperature

0° to 50°C (ambient)

Opto-isolated I/O Ports

1 input, 1 output

Power Consumption [Maximum]

4.2 W

Power Requirements

Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO

Serial Port

Supported

Storage Humidity

30 to 95% (no condensation)

Storage Temperature

-30° to 60°C