Teledyne FLIR BFS-PGE-120S4C-CS
12 MP, 8.5 FPS, Sony IMX226, Color
Teledyne FLIR BFS-PGE-120S4C-CS 12 MP, 8.5 FPS, Sony IMX226, Color Camera
Customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.
- Part Number
- BFS-PGE-120S4C-CS
- Resolution
- 4000 x 3000
- Megapixels
- 12
- Max Frame Rate Standard
- 10
- Max Frame Rate Turbodrive/Lossless Compression
- 26
- Sensor Model
- Sony IMX226
- Pixel Size
- 1.85
- Sensor Type
- CMOS
- Sensor Format
- 1/1.7"
- Shutter type
- Rolling shutter with global reset
- Spectrum
- Color
- Optical Filter
- IR-Cut Off (670 nm)
- Lens Mount
- CS-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 89 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Color correction matrix, gamma, lookup table, saturation, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
- White Balance
- Manual, automatic (AWB)
Performance
- Absolute Sensitivity Threshold (y)
- 5.71
- Dynamic Range dB
- 69.63
- Gain Range
- 0 dB to 27 dB
- QE Blue
- 60.02 @470 nm
- QE Green
- 65.21 @525 nm
- QE Red
- 39.01 @630 nm
- Saturation Capacity (e-)
- 11307
- Temporal Dark Noise (Read Noise)
- 3.13
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 30 mm
- Mass
- 36 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- <2.5 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Vendor: Teledyne Flir
Product Type: GigE Camera
SKU: BFS-PGE-120S4C-CS
Weight: 1.0 lb
Lead Times Vary, subject to existing open orders & stock availability.
Full Manufacturer Warranty
Contact us>> for special pricing over 5 pieces.
Features~
-
IEEE1588 clock synchronization
-
Full compatibility with popular third-party software
-
Lossless Compression (LLC) are also available with higher maximum frame rates and lower bandwidth requirements, helping maximize output without compromising image quality.
*Blackfly S is available in GigE, USB3, cased, and board-level versions.
Lead time varies by product. Standard non-back-order items ship within 1-7 days. Items in stock at our Sacramento warehouse ship on the same day that the order is placed. Back-ordered item lead times vary and are based on current production backlogs and existing open orders. After receipt of order you will be contacted with a shipping timeline. Please look out for a call or email from us about your ship date.