Teledyne FLIR BFS PGE 161S7M-C
4/3” Monochrome 16 MP at 7.5fps Camera FLIR BFS-PGE 161S7M-C customization services offered; sensor glass removal, filter installation, custom housing, etc. Inquire for more information.
Teledyne FLIR BFS PGE 161S7M-C 4/3” Monochrome 16 MP at 7.5fps Camera
The Exact Images You Need
Choice of CMOS global shutter, polarization, and high-sensitivity BSI sensors. Color transformation tools ensure true- to-life color. Advanced auto-algorithms or precise manual control
Develop Once, Deploy Anywhere
Support for a wide range of operating systems and host system hardware architectures. Easily switch to board level models for embedded systems. Simplified product iteration with consistent form factor across sensor sizes
Accelerate Development & Output
Compatible with third party software and hardware. Reduce coding requirements using powerful on-camera features. Accelerate output with LLC on select models. Quickly build custom applications with rich sample code and descriptive API logging.
- Part Number
- BFS-PGE-161S7M-C
- Resolution
- 5320 x 3032
- Megapixels
- 16.1
- Max Frame Rate Standard
- 7
- Max Frame Rate Turbodrive/Lossless Compression
- 12
- Sensor Model
- Sony IMX542
- Pixel Size
- 2.74
- Sensor Type
- CMOS
- Sensor Format
- 1.1"
- Shutter type
- Global shutter
- Spectrum
- Mono
- Optical Filter
- None
- Lens Mount
- C-mount
- Synchronization
- Software trigger, hardware trigger, action command, PTP
- Data Interface
- Gigabit Ethernet 1 Gbps
Features
- Acquisition Modes
- Continuous / Single Frame / Multi Frame
- Exposure Control
- Hardware trigger, programmable via camera API, automatic
- Exposure Range
- 26 µs to 30 seconds
- Flash Memory
- 6 MB non-volatile memory
- Gain Control
- Manual, automatic (AGC)
- Image Buffer
- 240 MB
- Image Processing
- Gamma, lookup table, and sharpness
- Partial Image Modes
- Pixel binning, decimation, ROI
- User Sets
- 2 user configuration sets for custom camera settings
Performance
- Absolute Sensitivity Threshold (y)
- 4.10
- Dynamic Range dB
- 70.55
- Gain Range
- 0 dB to 47 dB
- QE (Mono)
- 69.26 @525 nm
- Saturation Capacity (e-)
- 9562
- Temporal Dark Noise (Read Noise)
- 2.34
Physical
- Auxiliary Output
- 3.3 V, 120 mA maximum
- Connector
- RJ45 (horizontal locking) | Hirose HR10A-7R-6PB
- Digitization Bit Depth (ADC)
- 8-bit, 10-bit, 12-bit
- Dimensions [W x H x L]
- 29 mm × 29 mm × 39 mm
- Mass
- 53 g
- Non-Isolated I/O Ports
- 1 bi-directional, 1 input
- Operating Humidity
- 20 to 80% (no condensation)
- Operating Temperature
- 0° to 50°C (ambient)
- Opto-isolated I/O Ports
- 1 input, 1 output
- Power Consumption [Maximum]
- 4.2 W
- Power Requirements
- Power over Ethernet (PoE), or 12 V nominal (8 - 24 V) via GPIO
- Serial Port
- Supported
- Storage Humidity
- 30 to 95% (no condensation)
- Storage Temperature
- -30° to 60°C
Lead Times Vary, subject to existing open orders & stock availability.
Full Manufacturer Warranty
Contact us>> for special pricing over 5 pieces.
Ideal for PCB Inspection, Semiconductor applications, Metrology, and Research applications.
Features~
-
IEEE1588 clock synchronization
-
Full compatibility with popular third-party software
-
Lossless Compression (LLC) are also available with higher maximum frame rates and lower bandwidth requirements, helping maximize output without compromising image quality.
*Blackfly S is available in GigE, USB3, cased, and board-level versions.